One of the best things about VibeCanvas is how easy it is to put together. From unboxing to hanging on your wall, the whole process takes about five minutes.
What is in the Box
- Your custom-printed fabric tapestry
- 4 solid wood frame strips with mortise-and-tenon joinery
- RGB LED light strip pre-attached to frame inner edges
- Smart control module (optional add-on)
- Nail gun plus nails
- Wall mounting hardware
Step 1: Assemble the Frame
Connect the four wooden strips at the corners using the built-in mortise-and-tenon joints. Push each corner firmly until it clicks. No tools, no glue, no screws required.
Step 2: Mount the Fabric
Lay your fabric face-down on a flat surface. Center the frame on top. Fold the edges over and use the included nail gun to secure the fabric to the back of the wooden strips. Start at the four corners, then work your way around each side for a clean, taut finish.
Step 3: Connect the RGB Lights
The LED strip is already attached to the inner edge of the frame. Plug it into the included power adapter. With the smart control module, connect it in-line and download the companion app to customize your colors and lighting effects.
Step 4: Hang It Up
Use the included wall mounting hardware to hang your VibeCanvas. The frame is lightweight so standard picture hooks work perfectly. Step back, turn on the RGB lights, and enjoy.
Tips for Best Results
- Pull the fabric firmly before nailing to avoid wrinkles.
- Nail from the center of each side outward for an even stretch.
- Try a warm white RGB setting first to make the artwork colors pop.
Five minutes, zero frustration, and a completely transformed wall. Welcome to the VibeCanvas experience.